![]() ![]() ![]() When adding or removing the card (PCI or PCIe), please ground yourself so that you do not carry any static electricity. How to add a PCIe card to your desktop or Slim PC? If you have three devices connected to Port B, Port C, and Port E, each port will get one third of the 10Gbps. If you have two devices connected to Port C and Port E, each port will get 5Gbps. If you are using any of the hub ports (Port B to Port E), you can get a total of 10Gbps. If no device is connected to the USB C (Port A), it will not affect the rest of the ports. If you have more devices connected to Port B thru Port E, the data rate is distributed evenly. If you are using one of the hub port alone (Port B to Port E) you can get 10Gbps. Since one channel on the ASM3142 is linked to this hub, this hub can make use of 10 Gbps to provide all 4 ports linked to this hub in any combination. Each of the 3 (Port C, D, E) is also a BC 1.2, 1.5A charging Port.Īny device connected to the USB C (Port A) will always get 10Gbps. Since the second channel (10Gbps) is connected to the VL822 hub, the Speed allocated will depend on the Port usage (Port B to Port E). When one channel is used on Port A, you get the max of 10Gbps. On the ASM3142 controller, one channel goes directly to USB C (Port A) the second channel goes to the VL822 Hub controller. The VL822 Hub is a USB 3.2 Gen 2 hub and is capable of passing the USB data rate at 10Gbps per channel. This 1 USB 3.2 Gen 2 Controller supports either one channel at the theoretical speed of 10Gbps or two-channel with a total of 20Gbps. In this UGT-PC3A2C design, there are One USB 3.2 Gen2x2 Host Controller (ASM3142) and 1 hub controller (VL822-Q8) built into the card. The ASM3142 Controller is linked directly to the PCIe Gen III x2 slot. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |